Installed one watec 902H with a 300x zoom lens on the Y beam manifold looking at the baffle for ITMy.  Installed an illuminator on a BSC8 port in the vertex with remote controllable power supply for access from EY.

Installed a Sony camera on BSC 6 spool looking at the ETM.  And an illuminator on a spool port that is powered from the old DC power rack in the LVEA.  

Ported the video signal from the LVEA to the End station and From the end station to the MSR but have a problem with the MSR as we can not get sync. so lines are rolling through the frames.

Will work on getting video into the control room later.