- One Arm Test Begins: Gate valves opened, and the laser has been sent down the arm. If you find the beam, let Keita or Rana know ASAP. - Safety discussion: If the work involves manipulating components in the beam path, including viewport covers and gate valves, the LSO must be notified. In addition, all viewport covers must bare a warning that removal requires approval by the LSO. - BSC8: Transfer functions today. Discussions at morning meeting about coordinating cleaning with measurements. Decision was to hold off on cleaning until this is resolved. Also, GV-6 was opened. In addition to Illuminator lights, Rana and Keita were using a flashlight to locate the green laser beam. - BSC6: HEPI transfer functions. Richard installed cameras yesterday and set up the Illuminator lights. The cameras are still being worked on, as the analog feed from EndY is not great.GV-17 was opened. - HAM5: ICC ongoing. - HAM2: ISI - Electronics work. - HAM3: ISI - Richard doing cable-pulling prior to entry - ISCT4 is cleaned and ready to be moved to Betsy's spot. - H1 PSL: Michael worked on the software and network connections. - MidX everything out, grout beginning next week. - EndX prep beginning. - Craning: Moving doors in the LVEA (HAM5 and HAM6), crane in staging building (Corey). - LSB HVAC work to begin Friday morning. - Pickup+Delivery of cardboard recycling. - Riverside High School visited in the morning.
Excellent Summary for your final Operator log. :) We'll miss 'em!