Operators can check if any CDS Wifi Access Points (WAP) are left on by running the script wap_scan

david.barker@zotws2: wap_scan
wap-lvea is OFF
wap-ex is OFF
wap-ey is OFF
wap-mx is OFF
wap-my is OFF
 

During O2 these units are normally unplugged at the ethernet switch. When needed, the user will plug the ethernet cable into the switch, which will power up the WAP via power-over-ethernet (POE). When done with the WIFI, the user should remember to disconnect the cable before leaving the outbuilding.