Update: as of 2:08UTC, ALS X arm is locked at 0.92, COMMA_DEMOD is at 3.7 which is low, X arm in IR is flashing at 0.7, I'm declaring relative victory and moving on to the Y arm

X arm recovery:

• set PR2, PR3, ITMX, ETMX, and TMSX back to SDF slider values
• trended alignments back to 12:17, 00:44UTC
• worked my back to trended values
• worked on ITMX and EMX first, then those and PR3 and TMSX

Update: as of 2:41UTC, ALS Y arm locked at 1.05, X arm needs some attention again

Update: 2:59UTC - heading into LVEA to reset Noise Eater, second time my shift

Update: 3:14UTC - noise eater reset - X arm IR locked and WFS offloaded

Update: as of 3:33UTC, Initial Alignment is complete

• had to use MICH_SET to get BS close enough for MICH to lock
• had to use SET_SRY to get SRM close enough for SRC to lock

3:44UTC - locking full IFO

• 3:44UTC - locking arms green - X arm VCO offset voltage railed at 5V
• 3:48UTC - GRB came in, H1 is at Find_IR
• 4:25UTC - H1 is in DC Readout