16:30 Kyle to LVEA

17:00 PeterK out of PSL

17:00 Jason to ITMX oplev to recenter

17:00 JeffB to Diode room

17:00 Betsy to LVEA for TCSY work

17:30 JeffK doing PUM measurement on ETMY

17:30 Kyle to MY

18:00 Gerardo to EX

18:30 Kyle back to LVEA

18:30 Karen to EY

18:30 Robert to LVEA

22:00 Start LVEA sweep, Betsy found 1 phone in the west bay that was powered on & EY has a LCD monitor on the vac beckhoff that can be seen on in the security cam

22:30 Kyle to MY

 

Started relocking about 22:30, initial alignment was fine until SRC steps, where it seemed it was necessary to go through a step at a time to get SRC stable. DRMI was poorly aligned when we were back to locking proper, and took a bit of tweaking PRM and BS to recover. ITMY bounce and roll modes were both high as well, when we got near DC_readout.