Temps still low and exhaust pressure still high so I lowered incrementally all the way down to 1%. Pressure fell to 0 psi but exhaust temps are still read low (-33 C).
The Dewar was filled to a higher level than normal (86% full).
Raising LLCV to 12% and will go out to check actuator to make sure it's not frozen (we got snow today).
I lowered it even more to 14% at 21:40 UTC.
Temps still low and exhaust pressure still high so I lowered incrementally all the way down to 1%. Pressure fell to 0 psi but exhaust temps are still read low (-33 C).
The Dewar was filled to a higher level than normal (86% full).
Raising LLCV to 12% and will go out to check actuator to make sure it's not frozen (we got snow today).