late entry for yesterday's maintenance

WP6457 Remove coil driver BIO input to watchdogs

Hugh, Jim, Dave:

All ISI frontends except for HAM2,3 had new code loaded. After HAM4,5 were restarted, their DAQ status did not go to 0x2000. Subsequent DAQ restart did set their status to 0x2000. To be safe, we restarted these models a second time. Investigating why this happened.

WP6431 New IP12 Beckhoff vacuum controls code

Patrick, Dave:

h0vacex was restarted with new code. A new INI file was added to the DAQ. Also, water pressure channels were added (verifiied these are present in the other building systems).