Starting CP3 fill. LLCV enabled. LLCV set to manual control. LLCV set to 50% open. Fill completed in 46 seconds. LLCV set back to 14.0% open. Starting CP4 fill. LLCV enabled. LLCV set to manual control. LLCV set to 70% open. Fill completed in 1397 seconds. TC A did not register fill. LLCV set back to 38.0% open.
Raised CP4 LLCV to 39% open (from 38%).
Here is the temp plot. Striptool on the machine tracking CP 3,4 was down this morning.
Actually we found several computers and/or monitors powered down in the computer users room this morning. Logs indicate something may have happened at 10am Saturday morning.
In case this was done manually, we have put signs on the machines which support the vacuum controls group remote monitoring asking them not to be powered off.