Went through an updated LVEA Sweep checklist (T1500386) after Maintenance Day activities.  Issues/Notes are below (and some photos are attached).

Cleanroom curtains on ISC Tables:

Do we worry about this?  Found "mechanical shorts " of curtains contacting various ISC Tables.  Below are what I found for curtains/tables and actions taken (if any):

• Curtain contacting top of IOHT2L  -->  Resuspended curtain so it's no longer touching top of Enclosure
• Entire row of curtains resting on top of ISCT6  -->  Jeff B helped me roll these up and suspend them above ISCT6, so there is no longer contact.
• Curtains contacting cables on north side of IOHT2L, southside of ISCT1, & TCS table  --> NO Action Taken
• Curtain contacting top of IOHT2R  -->  NO Action Taken (since we don't use this table for operations).

Other Items:

• Speaker has long wire connected to it  -->   Reckon this must be for injections & is probably a known set-up.  Just wanted to make a note of it.
• "Blip Glitch" set up at HAM6 elec rack (set up for Sept-Dec 2016)  -->  This is a set up inside still connected inside the HAM6 Elec Rack.  Since Dec2016 is expired, do we still want to keep this set up?
• LVEA Hi-Bay Card Reader found OFF  -->  With Robert stating these Card Readers do not pose an a noise issue to H1, Landry asked that we keep Card Readers ON, so I turned this one on (note:  the reader with the switch for this particular one is in the LVEA).