[Dave, Kiwamu]

Since the ECR (E1700074) had been approved last night, we went ahead and implemented the change (34445) in h1asc in this morning. The below is a list of the new DAQ channels that are newly added for this bullseye system.

• PSL-DIAG-BULLSEYE_WID_OUT_DQ (2048 Hz)
• PSL-DIAG-BULLSEYE_PIT_OUT_DQ (2048 Hz)
• PSL-DIAG-BULLSEYE_YAW_OUT_DQ (2048 Hz)
• PSL-DIAG-BULLSEYE_SUM_OUT_DQ (2048 Hz)

The model restarted just fine. The medm screen was updated to reflect the new channel names and etc. See the attached for the new medm screen. This screen is accessible from the pull down tab of PSL on SITEMAP.