The T240 on the floor still looked well centered this morning so I opened the BRS thermal house, pulled the STS2 and installed the T240.  Wrapped it up in an ad hoc thermal blanket; maybe the low end will be even better for it.

Couple photos attached.  Will post some data after a few hours or tomorrow--likely will need a mass centering as this will be a different temp environment for the instrument.

Addition: the channels are:

X == H1:PEM-EY_ADC_0_09_OUT_DQ

Y == H1:PEM-EY_ADC_0_10_OUT_DQ

Z == H1:PEM-EY_ADC_0_19_OUT

That's right, the Z signal has no DQ variant.