Dave B., Jeff G. The Simulink models for H2 SUS ITMY and ETMY were modified today to add the RFM capabilities between the Corner and End-Y stations. Both models 'h2susitmy.mdl" and "h2susetmy.mdl" been compiled and installed on the frontends 'h2susb478' and 'h2susb6', respectively. The top level of each custom model needed the inputs re-connected to the common "QUAD_MASTER" library part. There were six additional inputs added to the "QUAD_MASTER.adl" inputs and three outputs, which were terminated from the top level. The changes to the top level were also intended to facilitate the use of the newly-installed IPC card on 'h2susb6'. Changes saved and committed to the SVN under: '~/userapps/sus/h2/models/' as "h2susitmy.mdl" & "h2susetmy.mdl"