J. Kissel

The setup used to tune the frequency of the HAM ISI Tuned Mass Dampers (D0900703) during the most recent HAM6 vent (see LHO aLOG 26488) has been packed up to make room for other up-coming post-O2 installation prep work in the OSB Optics Lab. 

We will need this set up again as we continue to populate the rest of the HAM's ISIs with blade spring dampers (), which necessitate retuning of the already-installed TMDs.

The setup has been put into a bin, and is now stored in the blue set of cabinets in the back "IOO" room of the OSB optics lab, on the right half of shelf 2 of Cabinet 21.

I attach a set of pictures that show the setup as it was found, and then several follow up pictures to show how it was packed and where it lives as of this aLOG.