To run the new matlab lockloss application please do the following:

From the SITEMAP MEDM, Select the 'SYS' pull down, select the last item  'Lock Loss'. This opens the LOCKLOSS_MEDM.adl screen.

Press the 'Run the LockLoss Analysis program' button to start the application. An xterm should open, followed by the matlab2016b splash screen. The UI Figure graphical user interface window will then appear, and you should see no errors in the xterm window (see figure).

We have several minor issues we are working on:

To exit the program, it is best to press the 'X' close button on the top bar of both the UI and the xterm. When the UI window is closed, the matlab session won't return a command line prompt in the xterm without a ctrl-c.

The new lockloss3 python script opens an xterm which shows an error "execvp guardlog: No such file or directory" and does not show the guardlog, but the data plot is generated correctly. Also the xterm requires two 'X' close button presses to dismiss it.

Please email me if there are any other issues with this install. Thanks, Dave