jason.oberling@LIGO.ORG - posted 09:00, Tuesday 25 April 2017 - last comment - 12:10, Tuesday 25 April 2017(35766)
PSL HPO Pump Diode Currents Adjusted
This morning I adjusted the HPO pump diode currents. All currents were raised by 0.1A. The new and old values are summarized in the table below:
| Old (A) | New (A) | |
| DB1 | 52.4 | 52.5 |
| DB2 | 51.9 | 52.0 |
| DB3 | 51.9 | 52.0 |
| DB4 | 51.9 | 52.0 |
All work was done with the ISS OFF. The HPO is outputting ~169.2W, the ISS was turned back ON.
Comments related to this report
Images attached to this comment
