WP 6639

The Beckhoff PLC code for h0vacmr was updated to match the change of the IP6 controller from a dualvac to a gamma. This required stopping and restarting the code, so there should be a gap in the data for the vacuum MR channels during this time.

The control room MEDM screens are updated except for the dedicated vacuum computer in the back of the room. I will update that one when the film crew is done.

The minute trend files were renamed to make the following changes:

Old -> New
H0:VAC-MR_IP6_EI166_A_HV_VOLTS -> H0:VAC-MR_IP6_EI166_HV_VOLTS
H0:VAC-MR_IP6_EI166_A_HV_VOLTS_ERROR -> H0:VAC-MR_IP6_EI166_HV_VOLTS_ERROR
H0:VAC-MR_IP6_EI166_A_HV_KVOLTS -> H0:VAC-MR_IP6_EI166_HV_KVOLTS
H0:VAC-MR_IP6_EI166_A_HV_KVOLTS_ERROR -> H0:VAC-MR_IP6_EI166_HV_KVOLTS_ERROR
H0:VAC-MR_IP6_II166_A_IC_VOLTS -> H0:VAC-MR_IP6_II166_IC_VOLTS
H0:VAC-MR_IP6_II166_A_IC_VOLTS_ERROR -> H0:VAC-MR_IP6_II166_IC_VOLTS_ERROR
H0:VAC-MR_IP6_VI166_A_PRESS_TORR -> H0:VAC-MR_IP6_VI166_PRESS_TORR
H0:VAC-MR_IP6_VI166_A_PRESS_TORR_ERROR -> H0:VAC-MR_IP6_VI166_PRESS_TORR_ERROR
H0:VAC-MR_IP6_CS166_A_STATUS -> H0:VAC-MR_IP6_CS166_STATUS

The following channels are no longer available through dataviewer:

H0:VAC-MR_IP6_166_STATUS
H0:VAC-MR_IP6_CS166_A_STATUS
H0:VAC-MR_IP6_CS166_B_STATUS
H0:VAC-MR_IP6_EI166_A_HV_KVOLTS
H0:VAC-MR_IP6_EI166_A_HV_KVOLTS_ERROR
H0:VAC-MR_IP6_EI166_A_HV_VOLTS
H0:VAC-MR_IP6_EI166_A_HV_VOLTS_ERROR
H0:VAC-MR_IP6_EI166_B_HV_KVOLTS
H0:VAC-MR_IP6_EI166_B_HV_KVOLTS_ERROR
H0:VAC-MR_IP6_EI166_B_HV_VOLTS
H0:VAC-MR_IP6_EI166_B_HV_VOLTS_ERROR
H0:VAC-MR_IP6_HS166A_A_START
H0:VAC-MR_IP6_HS166B_A_STOP
H0:VAC-MR_IP6_HS166C_B_START
H0:VAC-MR_IP6_HS166D_B_STOP
H0:VAC-MR_IP6_II166_A_IC_VOLTS
H0:VAC-MR_IP6_II166_A_IC_VOLTS_ERROR
H0:VAC-MR_IP6_II166_B_IC_VOLTS
H0:VAC-MR_IP6_II166_B_IC_VOLTS_ERROR
H0:VAC-MR_IP6_VI166_A_PRESS_TORR
H0:VAC-MR_IP6_VI166_A_PRESS_TORR_ERROR
H0:VAC-MR_IP6_VI166_B_PRESS_TORR
H0:VAC-MR_IP6_VI166_B_PRESS_TORR_ERROR
H0:VAC-MR_IP6_XA166_A_FAULT
H0:VAC-MR_IP6_XA166_A_FAULT_ERROR
H0:VAC-MR_IP6_XA166_B_FAULT
H0:VAC-MR_IP6_XA166_B_FAULT_ERROR