Today, we finally stuffed the optic in the PR2 suspension and started correcting it's roll.  We will finish suspending it tomorrow.  As well, Filiberto and Travis sorted out a cable issue on the PR2 chamberside testing setup.  Since, for the moment, we cannot test both MC2 and PR2 simulatenously, and PR2 is our higher priority, we have "given" the shared cable between them to PR2 in hopes of getting it's full data set run over the next 4 business days.  Seek Filiberto if for some reason you need it moved back to MC2 (possibly to facilitate it's testing later next week).