After finishing assessing and adjusting the roll and pitch of the suspensed PR2 optic, we started adjusting the 14 OSEM positions. During the coarse of this, we broke a magnet off of the PR2 optic. Mark Barton and Travis are looking into regluing it onto the optic within the suspension, in an effort to retain some sort of schedule for next week while our team is stretched over to LLO. Lesson learned is that the EQ stops need to be set very close while adjustments are being made. I thought this was the case when we were working on it, but clearly not close enough. It's unfortunate that the top BOSEM adjustment tools and your hand are very close to the suspension wire making knocking the suspended masses around easy.