All times in UTC:
07:46 Nuc2 restarting
07:49Nuc3 restarting
07:56 Nuc6 restarting
07:57 Nuc5 restarting
08:05 Nuc4 doesn't seem to take the "Restart Command" going to try "Shutdown" and manually reboot.
- monitors wouldn't come on after reboot. I manually turned on the bottome display but the top is goin to require a ladder. It seems that the scripts ran but it's all onn the bottom display and the top is still on "standby" power.
- so, a little step-ladder and a little button push got the monitor on and pluging the KB/Mouse directly made arranging the screens easy.
08:16 Nuc1 restarting
- had to manually browse to the earthquake page of USGS.
08:32 Nuc0 restarting
- As i suspected. The instructions for handling this FOM need to be updated. The information to the template fo showing all three ranges isn't as it's stated in the wiki instructions. Running " /home/controls/HL-Range2.xml" no LLO on the graph.
It seems LLO has now appeared on the graph. I guess I was a bit hasty. I do, however, have to go and turn off the symbols for each of the plots so that they look as they usually do. Perhaps I'm still not running the correct template?