In preparation for IOT2R transport, I removed loose things from IOT2R.

Loose beam dumps were moved to the optics lab.

NPRO controller (S/N 406), an adjustable Faraday isolator from Drever lab, one wave plate (no ID), one 45 deg 99% splitter, one mirror (HR?, no ID), one cube (no ID), and two lenses (one is BICX-25.0-76.6-C, the other is without ID) were all moved to ISC cabinet in the sqz bay.

Two lexan viewport protection plates were moved from inside to the top of the table enclosure.

Everything else is still inside the table. Most notably, NPRO head and the cables.