HAM2 (Apollo)
- Work Platforms installed around HAM2

HAM3 (Kissel, Radkins, Warner)
- Finished installing all HAM3 ISI damping mechanisms but Corner 3 Horz. GS13 Can Damper. Corner 1 & 2 walls are back on and torqued
- TMDs still need to be retuned and re-installed
- All three corners' have been B&K hammered

BSC3 / ITMX (Kissel, Sadecki)
- Finished -X/+Y and +X/-Y fiber characterization w/ speaker array this time (and measured up 6th harmonic at 3k)
- Set characterization setup to read out remaining -X/-Y

BSC2 (Schofield)
- Characterized resonances of TCS / Oplev steering mirrors