Reports until 15:23, Thursday 28 September 2017
H1 CDS
david.barker@LIGO.ORG - posted 15:23, Thursday 28 September 2017 - last comment - 15:54, Thursday 28 September 2017(38828)
some digital video gig-e cameras did not recover from the 16th Sept power glitch

Cheryl, Dave, Carlos:

Cheryl noticed that the IO GIGE1,2 cameras are not working in the PSL enclosure. Their last good data points were at the Sat 16th Sep 08:12 PDT site power outage.

IO GIGE2 is ping-able, but the code will not start. IO GIGE1 is not ping-able. Carlos is going to cleanly power cycle these cameras (they are POE) to see if we can clear the error. If this works, the same will be done on the other non-functioning cameras (listed below)

h1digivideo0: 02(MC Refl), 03(MC Trans), 09(HWS CAM 0)

h1digivideo1: 18(AS Air), 19(OMC Refl), 20(OMC Trans)

h1digivideo2: 28(IO GIGE1), 29(IO GIGE2)

Comments related to this report
david.barker@LIGO.ORG - 15:54, Thursday 28 September 2017 (38831)
Link

The CER switch ports do not show any link lights. We will investigate tomorrow in the LVEA to ensure there is an intact cable run up to the cameras through the patch panels.