WP7162. Jeff, Arnab, Dave:

Arnab and I installed a 6th ADC card into h1susauxh56's IO Chassis.  To maintain a physical ADC block or cards in the Chassis, we moved the 5th card from slot 1-8 one slot to the right to 1-7, and then installed the new 6th card into the vacated slot 1-8. The interface cards are in numerical order.

The h1iopsusauxh56 model was updated to read the 6th ADC.

We installed Jeff's new h1susopo model into the CDS system, following my instructions on the wiki page https://cdswiki.ligo-wa.caltech.edu/wiki/AddingNewFrontEndModel

We were planning on adding the SQZ beckhoff PLC (h1ecatc1plc4) to the DAQ as well, but I discovered 60 channels in the INI file which are not in the running system. I will work with Daniel and Patrick next week to resolve this.

The DAQ was restarted to sync up to the new h1iopsusauxh56 and the new h1susopo model. The second trend file at the time of the restart was hidden away for NDS1 trending purposes.

As-Built IO Chassis drawing changes are forthcoming.