Sheila, Dave:

at 16:18 PST I restarted the DAQ to:

use the latest H1EDCU_ECATC1PLC2.ini

use the latest H1EDCU_ECATC1PLC4.ini

use the latest H0EDCU_FMCS.ini

add the model h1sqz to the DAQ for the first time

h1fw0 did not participate in this DAQ restart, it was being held offline for its RAID upgrade.

Following the DAQ restart I restarted the h1sqz model. It did not start, it is attempting to use DAC channels currently being used by h1omc. We will investigate this tomorrow, for now h1sqz is being left in its disabled state.

H0EDCU_FMCS.ini:

added:

+[H0:FMC-CS_LVEA_ZONE1A_E_DEGC]
+[H0:FMC-CS_LVEA_ZONE1A_E_DEGF]
+[H0:FMC-CS_LVEA_ZONE1A_F_DEGC]
+[H0:FMC-CS_LVEA_ZONE1A_F_DEGF]
+[H0:FMC-CS_LVEA_ZONE4_G_DEGC]
+[H0:FMC-CS_LVEA_ZONE4_G_DEGF]
+[H0:FMC-CS_LVEA_ZONE4_H_DEGC]
+[H0:FMC-CS_LVEA_ZONE4_H_DEGF]
+[H0:FMC-CS_LVEA_ZONE5_I_DEGC]
+[H0:FMC-CS_LVEA_ZONE5_I_DEGF]
+[H0:FMC-CS_LVEA_ZONE5_J_DEGC]
+[H0:FMC-CS_LVEA_ZONE5_J_DEGF]
 

removed:

-[H0:FMC-CS_LVEA_AH_COOLVALVE_1]
-[H0:FMC-CS_LVEA_AH_COOLVALVE_2]
-[H0:FMC-CS_LVEA_AH_COOLVALVE_3]
-[H0:FMC-CS_LVEA_AH_COOLVALVE_4]
-[H0:FMC-CS_LVEA_AH_DAMPER_1]
-[H0:FMC-CS_LVEA_AH_DAMPER_2]
-[H0:FMC-CS_LVEA_AH_PITCH_VANE_1]
-[H0:FMC-CS_LVEA_AH_PITCH_VANE_2]
-[H0:FMC-CS_LVEA_AH_PITCH_VANE_3]
-[H0:FMC-CS_LVEA_AH_PITCH_VANE_4]
-[H0:FMC-CS_LVEA_HEATER_ZONE1A]
-[H0:FMC-CS_LVEA_HEATER_ZONE1B]
-[H0:FMC-CS_LVEA_HEATER_ZONE2A]
-[H0:FMC-CS_LVEA_HEATER_ZONE2B]
-[H0:FMC-CS_LVEA_HEATER_ZONE3A]
-[H0:FMC-CS_LVEA_HEATER_ZONE3B]
-[H0:FMC-CS_LVEA_HEATER_ZONE4]
-[H0:FMC-CS_LVEA_HEATER_ZONE5]
-[H0:FMC-CS_OSB_AH_COOLVALVE_5]
-[H0:FMC-CS_OSB_AH_COOLVALVE_6]
-[H0:FMC-CS_OSB_AH_HEATINGCOIL_10]
-[H0:FMC-CS_OSB_AH_HEATINGCOIL_9]
-[H0:FMC-MILLIAMP_MAXVAL]