The laser may be turned on in the squeezer bay. This creates a laser hazard at height.

4 rails and a panel are in the oven and will be scanned today
B&K measurements have been taken for all IMs
Apollo will be back today to put AH1 into the new FMCS control system
Corey will be replacing damaged black glass in HAM6
Corey will install an optic in a tip tilt suspension in HAM5
Corey will install viton on an OMC baffle
GV6 may be closed today
Robert wants to measure the resonances of the ITMX elliptical baffles