The OFI test setup in the optics lab has been rebuit. Almost ready for the OFI test. The laser source table of the beam launcher was reused as the fiber coupled light source while the beam launcher table is kept as it is. Just the fiber coupler was taken from the mount on the beam launcher table. The output fiber coupler was placed on the table at 6" height. The beam was mode matched to the mode for the OFI (2mm in radius).
The OFI test setup in the optics lab has been rebuit. Almost ready for the OFI test. The laser source table of the beam launcher was reused as the fiber coupled light source while the beam launcher table is kept as it is. Just the fiber coupler was taken from the mount on the beam launcher table. The output fiber coupler was placed on the table at 6" height. The beam was mode matched to the mode for the OFI (2mm in radius).