JimW CoreyG HughR With IAS signing off on position yesterday, we did a final check on elevation/leveling and did need to make some vertical adjustments. We ended up with the Optical Table 0.1mm high at -240.3mm and level to 100urad (+-0.1mm) These vertical adjustments barely moved the system horizontally--based on Dial Indicators the sw & se corners moved 1 & 2 mils (<0.05mm). So we have locked up the HEPI and are now doing ISI measurements. We will continue with ISI testing, then attached HEPI Actuators, followed by a post install (actuators) IAS check if dial indicator readings suggest it is warranted. Attached is the surveying and dial indicator readings logbook page.