Early Week Stuff:

Laser Safety:

Albert & Dave: All Hands Meeting today at noon (tentatively) in Multi-Purpose Room
Regular Monthly Safety Steering Meeting devoted to laser safety

Acceptable lasers: Jason's alignment laser (was measured & approved by Peter)

CO2 TCS Lasers: Couldn't power them on to check them last Fri. (power cables probably disconnected when tables moved.) Lasers have class-II sticker (which is eye-safe), but Peter wants to measure them. So not acceptable until tested by Peter King.

HAM5: Few items left for Betsy, Gerardo, Hugh. Goal to close this week!

OFI dog clamp down (Gerardo)
OFI AOSEMs (Betsy, Gerardo)
Baffles (Jim)
ZnSoleniod window/viewport (Gerardo)
etc.....

HAM2: IM Baffle Viton Install (Cheryl)

Audit baffle alignment list & note it.(TJ & Betsy)

First Contact work: H4, H5, B1

B&K: H5, H2, B2 (Kissel)

H6 class-a feedthru fix (Hugh)

Contamination Control Note: vert & horiz wafers needed for HAMs

Satellite Amp Ground checks: H3, H4, H2, H5, B1, B2, B3

Later in week:

Doors for B1, H4, H5, H6

VAC: H4 Cleanroom should be moved after doors on, for a NEG pump install

Tues Maintenance:

TCS AOM Drivers: modified so can have readback lights in control room (TJ)
CDS Freeze continues (Hanks)
Filter swap for air handlers in the corner station (bubba)

Squeezer: On hold due to laser, maybe have some cables