Summary:
Main activities today have been closing out HAM2 & HAM3 (the latter had doors installed). There were also some model/front end/DAQ restarts as well.
Day's Activities:
- 15:30-17:00 Craning work (Mark & Tyler)...will work on NEG pump after
- 16:04 Dust Monitor 10 (BSC1) started having counts of up to 250.
- 16:05-16:22 Apollo consulting (Bubba)
- 16:06: HAM2 close out work (Betsy, Travis )
- 17:08: Transfer functions for MCs (Betsy/Travis) & PRs (Kissel)
- 16:18 - 17:20 Cleaning Room work & Dust Monitor work in LVEA (Jeff B)
- 16:22 HAM6/CER Squeezer cabling (Fil, Richard, Elizabeth)
- 16:55 Squeezer Bay work (Terry)
- 17:08, 17:42, 17:58: "Noise Eater out of range" alarms, notified Jason (sounds like a bug)
- 17:23-17:57 NEG pump work in output (Mark & Tyler)
- 17:27-20:00 Optics Lab work (Nutsinee)
- 17:29-17:34: Reset Noise Eater (Jason)
- 17: 40-18:35 EX & EY Dust Monitor work (Jeff B)
- 18:00 Moving items from HiBay to EY (Mark & Tyler)
- 18:26 Moving cable for PSL Bullseye (related to ASC change) (Marc)
- 18:34 HAM6 ISI WD tripped (probably due to squeezer cable-pulling, will leave tripped)
- 18:36 PSL tour to Brijesh & SR3 oplev centering (Jason/Brijesh)
- 18:46 PSL Crystal Chiller top off (Corey)
- ~19:00 CDS SUSH2b & SUSH2a glitched (RED on CDS Overview). We suspect the rack was shorted with nearby VOPO/Squeezer cable pulling work.
- 19:15-20:00 HAM3 unlock/balance (Hugh)
- 19:47 HWS4 Table work (Greg)---ONGOING at 0:00utc
- 19:45 CDS Activities: Restarting H2A, H2B, ASC front ends & also DAQ Restart (Dave)
- Took H2A (MC2, MC3, PRM, PR3) optics to SAFE
- Restarting NDS needed
- 20:04 HAM2 unlock/balance (Hugh)
- 20:13 HAM3 transfer functions (Jim)
- 20:20 Autoburt & matlab servers reboot completed (Carlos)
- 20:57 Oplev work completed this morning (Jason)
- 21:30 HAM2 transfer functions (Jim)
- 21:44 0:00 HAM3 Doors installed (Mark, Tyler, Bubba)
- Will do HAM2 doors tomorrow.
- 21:46 LVEA clean-up work (Chris S., Betsy)
- 22:17-23:02 EY Oplev laser swap (Jason)
- 23:13-0:05 Check Pcal Alignment at EY (Evan, Darkhan, Rick)
- 23:23 Centering EY Oplev (Jason)
- 0:03 Turning off environmental controls for the PSL & turning OFF the PSL (Jason)