Many horizontal/working surfaces at EY have/had a hodge podge of tools, parts, cables, etc.  To help peck away at the clean-up needed at EY, we cleared away some of this stuff (with a focus on optics, optical hardware, some cabling, etc.).  Restored a few cables/connectors to the Commissioning rack & Mark/Tyler moved this out of the way into the middle roll-up door room.  

On some tables and a white beam on the West wall, there were optics, empty optics containers, an IR viewer, optical hardware (i.e. non-ISC dog clamps, posts, mounts, etc.), etc.  I put all of this stuff in a tote and will claim it on behalf of ISC.  If someone recognizes any of this stuff, please let me know (attached are photos of most of the parts).  A possible clue for the ownership of some of this stuff is that some of it was accompanied by two copies of the "Test Procedure for Low Noise VCO" T1100083....but perhaps this was just scrap paper.