cheryl.vorvick@LIGO.ORG - posted 17:23, Tuesday 16 January 2018 (40143)
IO camera changes
MC3 camera is looking at the MC1 baffle aperture
MC2 camera is zoomed in to the MC2 Z baffle aperture
PRM camera is supposed to be looking at MC3 baffle aperture, but shows no light, will revisit
PR2 camera is supposed to be looking at PR2, but is now on HAM2 East door, and it's cable didn't reach, so it's pulgged into one of the IOT2R cables, not connected
HAM3 West door video camera changed viewports
BSC illuminator is off, unplugged
all cameras are focused on the IR light, not visible