TITLE: 02/16 Day Shift: 16:00-00:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Planned Engineering
INCOMING OPERATOR: None
SHIFT SUMMARY:

It was decided the corner station will be vented on Tues.  7.5 Magnitude EQ from Mexico ended the shift.  Sheila is still in the Optics Lab doing Squeezer measurements.
LOG:

• ~15:00 Film crew escorted around site by Thomas
• ~ Electrical work at MY (Ken D)
• 15:04 Removing BSC Arm at EY (Mark D, Chris S, joined by Travis)
• 15:09 Prepping for ISCT6 move (Terry)
• 15:53 H1PSL enclosure (Peter, Bartlett, Jason joining @17:20)
  • 19:30 Bartlett & Jason return to work on chiller plumbing
• 17:16 LSC front end went down (I didn't notice until Dave walked in to tell me about a very RED CDS Overview).
  • Recovery involved Dave, Jeff, myself, Greg...
  • 19:05 Resetting TCS laser controllers which went down due to chillers (Greg)
• 17:30 Running cable at EX (Ed & Marc)
• 17:48 MY visit (Chandra & Gerardo)
• 17:52 Craning items (Mark,TJ)
• 18:07 ISCT6 measurements (Nutsinee, Terry, Daniel?)
  • 19:59 out for lunch (Nutsinee)
• 18:10 Working on ETMy at EY(Betsy, Travis)
• 18:23 Disconnecting high voltage for Squeezer (Fil)
• 19:07 Trip to CER to check on cables (Ed, Fil)
• 19:32 Trip to CER to look at SR3 Oplev (Kissel)
• 20:30 Tour in LVEA (Betsy)
• 21:01-22:50 Forklift from LVEA to MY & EX light bulbs (Mark D)
• 21:09 Scanning HAM6 racks (Elizabeth)
• 21:18 - 21:08 Craning ISCT6 in place...used 10' straps. (Nutsinee, Terry, Daniel, Corey)
  • Afteward Squeezer crew prepped the table just outside the HAM6 cleanroom.
• Patrick covered "the chair" while I was craning.  Here are activities when away:
  • 21:18 Sheila to optics lab
  • 21:26 - 21:40 Betsy taking guests to roof
  • 21:28 Hugh to HAM6 area
  • 21:43 Marc and Filiberto to HAM6 area for cable testing
  • 21:53 Elizabeth to CER
• Staging PSL's HPO for drying it out with dry nitrogen (Jeff & Peter)
• 22:19 Restart EY BRS computer because it was rung up this morning (Patrick & Jim)
• 22:43 Testing cables (Hugh, Fil, Marc)
• 23:00 Working in H1 PSL Enclosure (Jason)
• 23:03 Powering Beer Garden cleanroom for next week's Corner vent (Mark D.)
• 23:48 Magnitude 7.5 EQ warning:  On ISI Config, I hit the "VERY LARGE EQ" button & said "y".  I think this didn't do much since after losing LSC earlier today, all the ISIs were transitioned to ISI_DAMPED_HEPI_OFFLINE.
• 23:59:  Noticed OBSERVATORY MODE was LOCKING....it must have come back this way after the LSC front end crash this morning.  Returned it to PLANNED ENGINEERING.
• 23:59 MY work (Fil & Gerardo)