WP7397 DNS server upgrade
Carlos, Ryan:
The internal CDS DNS servers were upgraded, please see alog 40855 for details.
WP7380 Squeeze model changes
Sheila, Dave:
The models h1omc, h1asc, h1sqzwfs and h1susopo were modified and restarted this morning.
Seismic STS-GND site wide data distribution
Hugh, Dave:
We modified the models h1isietmx, h1pemex, h1oaf and h1isiitmy to send RFM data between the corner station and EX. Please see secondary alog for details of the problem found and its resolution.
HWWD reset at EY.
The HWWD unit was reset at EY to permit ISI operation. I verified that the LEDs did their startup sequence at the time of the reset.
Fixed broken related display links on SDF_OVERVIEW MEDM
There were three broken buttons on the new SDF MEDM, these are fixed.
New Beckhoff C1PLC4 and safety configurations
Daniel, Patrick, Dave:
New H1ECATC1PLC4.ini and H0EDCU_SAFETY.ini files were generated. I still need to update the autoBurt.req and SDFs for these systems.
DAQ Restart.
DAQ was restarted for various changes:
new H1EDCU_ECATC1PLC4.ini
new H0EDCU_SAFETY.ini
new ini files for h1isietmx, h1oaf, h1pemex, h1sqzwfs, h1susopo
I attempted to add a new INI file for the Rate-Of-Change (ROC) system, which is supporting CP4 bake-out. But I found that some of the channel names exceed the 54 max length limit. Because of this the DAQ restart took longer than usual (about 10 minutes compared with a couple of minutes)
WP7377 h1tw0 hardware replacement
Carlos, Jonathan
The old h1tw0 (cpu and external raid) were removed from the DAQ rack, and were replaced with a single new 4U unit.
Vacuum cell phone alarms, both Thermocouples high alarm set at 130C.
Chandra, Dave:
To support CP4 bake-out, the two thermocouples which are in the cell phone alarm system had their high alarm limit set to 130C.