Modifications to the old enclosure on the 'SMART TABLE UT2' in the LVEA laser lab area are complete (see picture 1). There were several components missing on this enclosure when I arrived that could not be located which I borrowed from the enclosure currently on the IOT1 table (bottom of the two stacked enclosures). These include angle brackets, 3 panels, and some panel bolts. This newly modified enclosure will serve as that for IOT1. The new 3' x 5' table, legs, and enclosure to serve as IOT2 have been assembled and is resting outside of the LVEA laser lab area. I noted that the new enclosures do not include the cable tray system that is being installed on the modded enclosures. I used the cable tray system intended for LIGO India's IOT1 enclosure and modified it to fit in the IOT2 enclosure. I unpacked and stowed the Light Pipe assembly inside the IOT2 enclosure awaiting install.