T Vo, Sheila

Attached is a screenshot for which PRX and the Michelson are roughly aligned.  We still need to aling the RMs to get light on REFL.  

Our next steps towards locking DRMI are:

• to set darkoffsets on the AS WFS, and
• using the swinging  michelson phase the AS WFS so that the michelson signal is in the Q phases.  We can try this for both 9Mz and 45Mz to get an idea of how we should set the phases for the REFL and POP sensors as well. 
• Then we should be able to lock the michelson and fine tune the 45MHz phase
• Attempt to lock PRX to align PRM
• Align onto the LSC POP and REFL diodes
• Attempt to align and lock PRMI