Thomas Vo, Sheila, TJ, Nutsinee

This morning Thomas TJ and I set the alignments of the OMs back to the alignments we found using the single bounce beam (41540), and steered the seed beam on to the AS WFS.  This meant that ZM1 was almost railed, as we had seen yesterday, so we moved it in yaw.  We were then able to center on the AS WFS for a couple of different pico alignments. 

We decided that this is the last thing we need to do in HAM6 for the squeezer before putting doors on, so after lunch Nutsinee TVo and I went back and removed our apertures and tools, wiped the table surfaces off, used the flashlight array to look at the VIP and other optics (didn't see any real problems), and Nutsinee took many photos.  We also spent some time clearing some of our equipment out of the area in preparation for moving the tables tomorrow.  Nutsinee checked that everything is secured inside both SQZT6 and ISCT6, so after removing the cables and carefully stowing the fibers we should be ready to move the tables tomorrow.