Reports until 14:00, Wednesday 16 May 2018
edmond.merilh@LIGO.ORG -
posted 14:00, Wednesday 16 May 2018 (42017)
Optical Lever Centering int the CS
Ed, Jason
- ITMY Oplev centering seems to be achieved by having to rail the translation stage responsible for pitch. This will eventually have to be addressed at a time in the future and will require some fairly invasive work/permits.
- ITMX Oplev centering went well
- PR3 Oplev centering didn't look achievable until it was determined and discovered that the Oplev LASER had been switched off. Once switched on, proper centering was rather easily achieved.
- BS Oplev centering went well