david.barker@LIGO.ORG - posted 12:24, Friday 03 August 2018 - last comment - 14:23, Friday 03 August 2018(43229)
WP7753 h1ascimc model change, add fast channels to DAQ
Sheila, Dave:
A new h1ascimc model was started with a new DAQ configuration:
+: fast channel H1:ASC-AS_A_RF45_I_SUM_OUT_DQ added to the DAQ
+: fast channel H1:ASC-AS_A_RF45_Q_SUM_OUT_DQ added to the DAQ
the DAQ was restarted.
This reminded me of the RCG3.2.3 work I had done on h1pemmx some time ago. It was a test system for the RCG3.2.3 upgrade of the SUS-QUAD models. Both its models and its mx_stream had been upgraded to 3.2.3 to show that the DAQ error could be cleared if the new mx_stream is ran. After the DAQ was restarted it was left running 3.2.3 models and 3.2 mx_stream (like the SUS-QUADs are). I recompiled h1ioppemmx and h1pemmx using rcg3.2 and restarted them, clearing the DAQ error on these models.
While the PIT and YAW signals from the ASC WFS are normalised, the SUM is not. We have modified the channels for ASC_AS_A_RF45_I and Q SUM the to include power normalisation.
The h1ascimc model was re-restarted to incorporate these changes.