The H1 BNS inspiral range Figure of Merit (FOM) is visible again showing realtime data in the control room, running from the dmtviewer on nuc0.

I've saved this configuration as H1CAL-range.xml. 

It is plotting the range from the SenseMonitor_CAL_H1 DMT monitor. Also, under the Range Tab for the graphics plot on the dmtviewer, the y-axis max is set to 1 Mpc. Someone will need to adjust that when the range goes above 1 Mpc.

(To get back to the static 2016 BNS inspiral range plot that was showing in the control room before, from the dmtviewer, open HL-range2.xml.)