Ops Shift Log: 08/17/2018, Day Shift 15:00 – 23:00 (08:00 - 16:00) Time - UTC (PT)

State of H1: Unlocked for post vent commissioning

Intent Bit: Commissioning

Support: N/A

Incoming Operator: N/A

Shift Summary: Commissioning work on locking for most of the day. Work on HWS and Squeezer. PSL was tripped off by the ACS installation work in the Diode room. Wiring was repaired and laser is back up. Further installation work in the diode room has been postponed until late next week.

 

Activity Log: Time - UTC (PT)

11:50 (04:50) Peter – Into the PSL to take measurements

13:50 (06:50) Peter – Out of the PSL enclosure

14:00 (07:00) Karen – Cleaning at End and Mid-Y

14:30 (07:30) Karen – Finished cleaning on Y arm – back to CS

14:58 (07:58) Vanessa – Going into the LVEA for cleaning

15:00 (08:00) Start of shift

15:12 (08:12) Nutsinee – Going to Squeezer table

15:45 (08:45) TVo – Turning on CO2-X laser

16:00 (09:00) TVo – Out of the LVEA

16:00 (09:00) Karen – Cleaning in the H2 and “lightbulb” buildings

16:22 (09:22) Karen – Back from the H2 building

17:02 (10:02) Dan – In LVEA at HWS table

17:09 (10:09) Dan – Out of the LVEA

17:40 (10:49) Filiberto – Going into the LVEA to recover equipment

18:00 (11:00) PSL down – Peter trying to restart

19:30 (12:30) PSL back up – Access control system install in diode room tripped off the laser

20:06 (13:06) Haocun, Nutsinee, & Terry – Going to the Squeezer table

22:03 (15:03) Kyle – Going to all buildings to pick up N2 delivery paperwork

22:18 (15:18) Dick – Going to PSL racks for RF hunting

22:39 (15:39) Marc – Going to PSL racks to work with Dick

22:52 (15:52) Kyle – Back from paperwork mission

23:00 (16:00) End of shift