After the earthquake in Greece I thought I was going to be able to recover lock with no problems. But before beginning the lock sequence I accidentally pressed the load button on ISC_LOCK. Briefly after, I tried going through the lock sequence and ISC_LOCK crashed so I restarted the ISC_LOCK guardian. After this, it was obvious that the green alignment did not look good. After attempting initial alignment for a while I noticed that the OPS_OVERVIEW had many red triangles on the screen. I do not know how long the screen was in this state. I figured I would not make things worse as I do not know how to recover from this so I restored the alignment to what it was before the earthquake. I am leaving the interferometer in initial alignment. I apologize in advance to the early morning commissioners if I have caused you any woes.
Thank you for putting the alignment sliders back - that's the right thing to do when you're feeling lost, and it makes things much easier. The red triangles indicate that all seismic platforms and HEPIs had their watchdogs tripped and were not in the correct state - this is a tricky one to recover from if you haven't done it before.