10/22/2012 - from Morning Meeting

LVEA work:
- HAM installation arm going on HAM2 E door today
- MC3 and MC1 prep chamberside continues
- HAM3 ISI being tested - may be something rubbing
- HAM3 table alignment is OK
- HAM6 RF cabling - needs to be tested
- BSC2 - one more housing to install, then actuators

EX work on hold

EY - dead ion pump, Richard shutting down power,

H2 PSL - old eLigo OMC work with electronics

-----------
End of the day:

Multiple reboots and recompiling of EY - not currently in a working condition - Dave, Jeff, Jim, and Vincent are working on it

IAS in LVEA looked at ITM pitch - Doug, Jason
- some spikes in dust, and when I talked to Doug about activity in the cleanroom with ITMY, it seems like the spikes were due to the sock coming off of the quad

iLigo OMC moved to H2 PSL enclosure, electronics hooked up and tested - Keita, Corey