Displaying report 1-1 of 1.
Reports until 17:18, Friday 07 January 2011
H2 INS
corey.gray@LIGO.ORG - posted 17:18, Friday 07 January 2011 (458)
BSC8 Scissors Tables Locked At Centered Position
(Corey, Hugh, Jim, Mitchell)
The Scissors Tables (and basically the entire Seismic Isolation System) were vertically adjusted such that the Scissors Tables were set to their "mid-point" elevations.  Shipping/Llot Links were installed to hold the Scissors Tables here (as we did for the H2 HAMs).  The Scissors Tables were actuated manually via a rod attached to a motor underneath the Scissors Table.  We needed a special key-ed tool to turn the crank and actuate the Scissors table.

We will do BSC7 next time we get a chance.
Displaying report 1-1 of 1.