Weekend Commissioning:  25 W work, looking at PI Modes (Seb & Terra)

Tues Maintenance Work Summary:  Stay in Laser Hazard & 4Hrs (i.e. end at noon)

• PSL/IO
  • PZT swap by  Jason, Cheryl, Keita (no other PSL work can go on until this work done!  Coordinate with HAM3 ISI work, if needed)
  • DBB work by Jason
  • Robert would like to do measurements after PZT swap
  • Dust Monitor move in Diode room (Jeff B)
• HAM3 ISI Noise Hunting of ~1Hz thing (Hugh)
  • IMC need to go OFFLINE if this happens, so will need to coordinate with PSL work.
• CDS: 
  • ESD work at EX & EY
  • Temperature sensors into PCal to look for noise
• Model Work
  • OMC Model Change (Keita)
  • HAM4/5/6 HEPI & ISI model updates (Hugh)
  • TCS Model Change:  Simulation fix (Danny)
  • LSC POPDC channels (Daniel)
  • ECAT CS 4 Only Beckhoff Restart (Daniel)
• PCal Work:  Calibration & Tune Up.  Start with EY.  (Rick)
• VAC
  • MY hammer drilling, extra vehicle traffic
  • MX annulus ion pump (this week)

Safety:  Be careful with icy conditions!