TITLE: 12/20 Day Shift: 16:00-00:00 UTC (08:00-16:00 PST), all times posted in UTC
STATE of H1: Commissioning
INCOMING OPERATOR: None
SHIFT SUMMARY:

Rough day with big earthquake which kept us down for first half of the day.  Then we had an EX timing crash which has kept us down for a good chunk of the afternoon.
LOG:

• DRMI & PRMI didn't look good (surprising after quick locking rest of night).  Will need to run alignment.
• 16:20 Cleaning in LVEA & YARM (Vanessa & Karen)
  • 16:50 Yarm complete (Karen)
• 16:28 HAM2/3 ISI transfer functions
• 17:10 EQ alarm for 7.4 at Russia.  Jim took SEI_CONF to EARTHQUAKE + manually requested SC_OFF for ITMy, ITMx, ETMy Stage 2's (trying to avoid WD trip).
• 17:12 Praxair arriving for CP1 fill (planned & purely coincidence with EQ)
• 17:14 Bug fixing by Jenne (since earth is noisy)
• 17:32 - 18:10 NDscope update (Jonathan)
• 17:48 Fiber measurements near HAM1/PSL & out at EX (Fil)
• 18:29 SUS ETMx Model & DAQ restart (Dave, Jenne)
• 18:41 Checking Power supplies (Richard)
• 18:44 Visiting LVEA for VAC computers (Gerardo)
• 18:52 Checking HAM2 Camera access (Cheryl, Charlie, Jason)
• 19:04 Xmid new ion pump (Gerardo)
• 19:00 PR2 Measurement (Hang)
• 19:25 EX ESD grounding toggle off/on (Richard)
• 19:45 EY ESD grounding (Fil)
• 19:45-22:45 Checking HAM2/3 cameras (Cheryl)
• 21:00 Running Alignment
• 21:36 EX went down "timing glitch/error"---ETMx had frozen M0 channels, & this tripped the ISI.
  • No body was down there when this happened.  (I was finishing up alignment....did get connection errors for SRC OFFLOAD
  • Kill models
  • "Restart the world" by Dave
  • Check Alignment sliders for ETMx & TMSx
  • 21:50 Dave out to EX
  • 22:30 Dave discovered we are missing a DAQ at EX.  Will need to go out to power cycle again.
• 22:00 Removing transformer (Gerardo)
• 22:02 CER hole plugging (Fil)
• 22:05 ISCT6 work (Nutsinee)

Handing off to Niko for last hour (have an appt in town).