[Luke, Paul, Giacomo]

In the late afternoon we moved the faraday isolator from the PSL enclosure to the HAM2 ISI. We used the cookie cutter place it, so it is already positioned properly. It is not clamped down though, as we don't have the right type of clamps. So, we left the cookie cutter on the table.

We also put in the periscope cookie cutter. The periscope does not have the optics and the black glass in it yet, but we temporarily place it on the ISI table to remove it from the chamberside cleanroom. It is clamped with two temporary clamps.

We couldn't place the cookie cutters for the HAUXes because of a number of issues (for which we should already have a solution), so we just positioned them such that the are (hopefully) out of the way for MC3 installation (but they can be moved easily).

Attached are a couple of pictures of the growing HAM2 population...