EricA & Hugh The welder finished the tubing runs Tuesday and yesterday we did a couple of the last things required. First the Actuator Flex hoses were attached to the 4-way valves. These valves are in recirculate mode. This position isolates the Actuator/Hose from the housing supply/return plumbing. The Actuator & hose have fluid in them; the housing tubing remains dry. The 4-way valve is very stiff and takes a good effort to turn so it is unlikely they will be inadvertently moved. Please don't do so purposely; we must flush the main lines before opening the valves. Second we started the install of the electronics modules. These reside out in front of the pier; please be mindful of these components.