Noticed frozen cameras on the wall this morning for:

• ITMy (h1cam23 on h1digivideo2)
• ETMy (h1cam27 on h1digivideo2)
• PR3 (h1cam14 on h1digivideo1)

Symptoms:  Camera views on video5 wall computer were froze for these cameras (including time stamp froze), and also could not bring up camera via the "!Launch fixed" button via medm.

Carlos was able to bring back PR3 by performing an individual start on h1digivideo1.  But ITMy & ETMy on h1digivideo2 were not as trivial, with ITMy remaining dead.  Tried individual starts, killed processes, and also performed a full restart on the server h1digivideo2.  Even with issues continuing, the h1digivideo2 web interface thinks they are all Running.

ETMy is sort of back, but it is slow (updates every ~15sec vs 1sec); even after I tried a Stop/Start via the Monit web interface.  Will leave on wall.

ITMy remains dead, and will require further work (Carlos and Richard mentioned this particular camera is known for causing grief).  Will take this camera off the wall in the meantime & file an FRS.