chandra.romel@LIGO.ORG - posted 10:39, Friday 18 January 2019 - last comment - 13:56, Tuesday 05 February 2019(46527)
GV12 inspection
Per Q1800019, I visually inspected H-GV12 on Dec. 19 to verify that the spindle nut and lock washer are present. Was not able to inspect torque setting without fall protection.
Images attached to this report
Comments related to this report
Attached are photos showing the indicated torque pre-load for GV12. Note that the number of exposed threads may also be important.
Images attached to this comment
