At Gabriele's request, I've summarized the TCS settings for 30W operation.

During Full IFO

ITMX:

• RH: P = 0.78W, dS/dP = -9.0uD/W. S_RH = -7.02uD [https://alog.ligo-la.caltech.edu/aLOG/index.php?callRep=15213]
• CO2: 600mW central, dS/dP = +15uD/W, S_CO2X = 9uD
  • https://alog.ligo-wa.caltech.edu/aLOG/index.php?callRep=45341 
• SELF:  abs = 0.25 +/- 0.05ppm, dS/dP = 487uD/W. P_inc = 143kW, S = +17.4uD [46683]
  • https://awiki.ligo-wa.caltech.edu/wiki/Auxillary_Optics_Stuff/TCSComponents/PreO3_Absorption_measurements
  • https://alog.ligo-la.caltech.edu/aLOG/index.php?callRep=25662
  • https://alog.ligo-wa.caltech.edu/aLOG/index.php?callRep=46683
• STATIC: ITM07. F = -310812m. S = 1/F = -3.2E-6 D [https://dcc.ligo.org/T1400602]

ITMY:

• RH: P = 2.56W, dS/dP = -9.0uD/W, S_RH = -23uD [https://alog.ligo-la.caltech.edu/aLOG/index.php?callRep=15213]
• CO2: 0W.
• SELF: Use single-pass map in https://alog.ligo-wa.caltech.edu/aLOG/index.php?callRep=46976
  • Single-pass map is (SELFOPD) in LHO_optimum_soln.mat
  • Was measured for delta P into IFO = 12W, 
  • Scale by 30/12 to account for scaling to 30W.
  • Then scale by 40/50 to account for reduction in power recycling gain.
• STATIC: ITM11.  F = +572117m. S = 1/F = +1.74E-6 D [https://dcc.ligo.org/T1400602]